2000-04-28 page 1 BSP603S2L target data sheet optimos ? ? ? ? = == = small-signal-transistor features ? n-channel ? enhancement mode ? avalanche rated ? logic level ? d v /d t rated product summary drain source voltage v ds 55 v drain-source on-state resistance r ds ( on ) 33 m ? continuous drain current i d 5.2 a vps05163 1 2 3 4 pin 1 pin 2/4 pin 3 g d s type package ordering code BSP603S2L sot-223 - marking - maximum ratings ,at t j = 25 c, unless otherwise specified parameter symbol value unit continuous drain current t a = 25 c t a = 70 c i d 5.2 4.1 a pulsed drain current t a = 25 c i d puls 21 avalanche energy, single pulse i d = 5.2 a , v dd = 25 v, r gs = 25 ? e as 150 mj avalanche energy, periodic limited by t j max e a r 0.18 reverse diode d v /d t i s = 5.2 a, v ds = 40 v, d i /d t = 200 a/s, t jmax = 150 c d v /d t 6 kv/s gate source voltage v gs 20 v power dissipation t a = 25 c p tot 1.8 w operating and storage temperature t j , t st g -55...+150 c iec climatic category; din iec 68-1 55/150/56
2000-04-28 page 2 BSP603S2L target data sheet thermal characteristics parameter symbol values unit min. typ. max. characteristics thermal resistance, junction - soldering point (pin 3) r thjs - 17 tbd k/w smd version, device on pcb: @ min. footprint @ 6 cm 2 cooling area f) r thja - - 100 - tbd 70 electrical characteristics , at t j = 25 c, unless otherwise specified parameter symbol values unit min. typ. max. static characteristics drain-source breakdown voltage v gs = 0 v, i d = 1 ma v (br)dss 55 - - v gate threshold voltage, v gs = v ds i d = 50 a v gs(th) 1.2 1.6 2 zero gate voltage drain current v ds = 55 v, v gs = 0 v, t j = 25 c v ds = 55 v, v gs = 0 v, t j = 125 c i dss - - 0.1 10 1 100 a gate-source leakage current v gs = 20 v, v ds = 0 v i gss - 10 100 na drain-source on-state resistance v gs = 4.5 v, i d = 2.6 a r ds(on) - tbd 40 m ? drain-source on-state resistance v gs = 10 v, i d = 2.6 a r ds(on) - tbd 33
2000-04-28 page 3 BSP603S2L target data sheet electrical characteristics , at t j = 25 c, unless otherwise specified parameter symbol conditions values unit min. typ. max. dynamic characteristics transconductance g fs v ds 2* i d * r ds(on)max , i d =4.1 tbd tbd - s input capacitance c iss v gs =0v, v ds =25v, f =1mhz - tbd tbd pf output capacitance c oss - tbd tbd reverse transfer capacitance c rss - tbd tbd turn-on delay time t d(on) v dd =30v, v gs =4.5v, i d =5.2a, r g =5.6 ? - tbd tbd ns rise time t r v dd =30v, v gs =4.5v, i d =5.2ma, r g =5.6 ? - tbd tbd turn-off delay time t d ( off ) - tbd tbd fall time t f - tbd tbd gate charge characteristics gate to source charge q g s v dd =40v, i d =5.2a - tbd tbd nc gate to drain charge q g d - tbd tbd gate charge total q g v dd =40v, i d =5.2a, v gs =0 to 10v - tbd tbd gate plateau voltage v (p lateau ) v dd =40v, i d =5.2a - tbd - v reverse diode inverse diode continuous forward current i s t a =25c - - 5.2 a inverse diode direct current, pulsed i sm - - 21 inverse diode forward voltage v sd v gs =0v, i f =5.2a - tbd tbd v reverse recovery time t rr v r =30v, i f = l s , d i f /d t =100a/s - tbd tbd ns reverse recovery charge q rr - tbd tbd nc soft factor t f / t s s - tbd -
2000-04-28 page 4 BSP603S2L target data sheet
2000-04-28 page 5 BSP603S2L target data sheet published by infineon technologies ag , bereichs kommunikation st.-martin-strasse 53, d-81541 mnchen ? infineon technologies ag 1999 all rights reserved. attention please! the information herein is given to describe certain components and shall not be considered as warranted characteristics. terms of delivery and rights to technical change reserved. we hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. infineon technologies is an approved cecc manufacturer. information for further information on technology, delivery terms and conditions and prices please contact your nearest infineon technologies office in germany or our infineon technologies reprensatives worldwide (see address list). warnings due to technical requirements components may contain dangerous substances. for information on the types in question please contact your nearest infineon technologies office. infineon technologies components may only be used in life-support devices or systems with the express written approval of infineon technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. if they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
|
